Outback systemen

OutBack PV MPPT Charge Controller:The Outback MX60 Maximum Power Point Tracking (MPPT) charge controller enables your PV system to achieve its highest possible performance. Rated for up to 60 amps of DC output current, the MX60 can be used with battery systems from 12 to 60 vdc with a PV open circuit voltage as high as 140 voc. The MX60's setpoints are fully adjustable to allow use with virtually any battery type and charging profile. The MX60 allows you to use a higher output voltage PV array with a lower battery voltage - such as charging a 24 vdc battery with a 48 vdc PV array. The four line, 80 character, backlit LCD display is used for programming and monitoring of the system's operation including built-in Data Logging with 64 days of memory.

OutBack Power System FLEXware 500: OutBack Power offers compact enclosures for all the AC and DC components of a renewable energy power conversion system. The FLEXware 500 series saves time, money and space by combining the disconnects, over-current protection devices and control components into easy-to-install enclosures. Capable of supporting one or two OutBack FX series inverter/chargers, up to three MX60 charge controllers, a MATE system controller and all the associated AC and DC components. The OutBack FLEXware 500 series can be fully customized to your application and ordered pre-wired or as individual components for field assembly. The following chart is just for example. There are a lot more possibilities for OutBack Systems in 12, 24 and 48 V, with or without solar.

The FLEXware 1000 series is the ideal AC and DC enclosure system for medium to large size renewable energy power conversion systems. The FLEXware is comprised of two compact enclosures for all of your systems?s AC and DC components. It saves time, money and space by combining disconnects, over-current protection devices and control components into easy-to-install enclosures. The FLEXware 1000 is capable of supporting up to four OutBack FX series inverter/chargers, six MX60 charge controllers, a MATE system controller and all the required AC and DC components and wiring. The OutBack FLEXware 1000 system can be fully customized to your application and ordered pre-wired or as individual components for field assembly. It is also available as a 3-Phase system. Three inverter/chargers can be configured to provide 120/208 VAC or 230/400 VAC four wire ?Wye/Star? three phase AC power. An inverter/charger is used to power each of the three legs for 3-phase AC power. The loads on each of the inverters does not need to be kept balanced, each phase is independently voltage regulated.The following chart is just for example. There are a lot more possibilities for OutBack Systems in 12, 24 and 48 V, with or without solar.